3010-01-517-0189 GEAR ASSEMBLY,SPEED DECREASER Index 5841-01-517-0191 RECEIVING SET,RADAR

National Stock Number:
5365-01-517-0190

Federal Supply Class:
5365

National Item Identification Number:
015170190

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
5PTC7007A01102019040LAMSCO WEST, INC
5PTC7007A01102081205THE BOEING COMPANY


Techincal Specification:
CONSTRUCTIONONE-PIECE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-B-152 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALCOPPER
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH1.880 INCHES MINIMUM AND 2.120 INCHES MAXIMUM
OVERALL THICKNESS0.003 INCHES NOMINAL
OVERALL WIDTH0.980 INCHES MINIMUM AND 1.220 INCHES MAXIMUM
STYLE DESIGNATORRECTANGULAR


Click here to Register for Free 30-day Trial