|
|
|
National Stock Number:
5365-01-515-8611
Federal Supply Class:
5365
National Item Identification Number:
015158611
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5793302 FIND 137 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5793547 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5793547-6 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.500 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 5.250 INCHES NOMINAL | | HOLE DIAMETER | 0.935 INCHES MINIMUM AND 0.943 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | 44165DE MICARTA MFR REF ALL MATERIAL RESPONSES | | MATERIAL | MICA | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 7.380 INCHES NOMINAL | | OVERALL THICKNESS | 0.063 INCHES NOMINAL | | OVERALL WIDTH | 3.750 INCHES NOMINAL | | SPECIAL FEATURES | EXPORT CONTROL DWG NOT TO BE RELEASED OUTSIDE USA | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|