|
|
National Stock Number: 5365-01-515-8584
Federal Supply Class: 5365
National Item Identification Number: 015158584
Description: SHIM
Detail: A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
5HM71303-111 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
BOLT HOLE QUANTITY | 2 | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.971 INCHES MINIMUM AND 1.031 INCHES MAXIMUM | CONSTRUCTION | LAMINATED | HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | LAMINATION QUANTITY | 21 | LAMINATION THICKNESS | 21.000 INCHES NOMINAL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499, COM+5, TYPE 1, CLASS 2 MIL SPEC SINGLE MATERIAL RESPONSE | MATERIAL | TITANIUM ALLOY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM LAMINATED | PROPRIETARY CHARACTERISTICS | PACS | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.190 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | OVERALL LENGTH | 1.420 INCHES MINIMUM AND 1.480 INCHES MAXIMUM | OVERALL THICKNESS | 0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM | OVERALL WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|