|
|
|
National Stock Number:
5365-01-515-0174
Federal Supply Class:
5365
National Item Identification Number:
015150174
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
|
Techincal Specification:
| APERTURE DIAMETER | 3.070 INCHES MINIMUM AND 3.090 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 5.860 INCHES NOMINAL | | BOLT HOLE QUANTITY | 6 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.200 INCHES MINIMUM AND 0.215 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 CONDITION 1/4 HARD TO FULL HARD MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, SHROUD | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 6.200 INCHES MINIMUM AND 6.210 INCHES MAXIMUM | | OVERALL THICKNESS | 0.007 INCHES NOMINAL | | SPECIAL FEATURES | THERE ARE 6 EQUALLY SPACED SLOTS LOCATED WITHIN 0.030 EITHER SIDE OF CENTERLINE ON THE INSIDE HOLE DIAMETER; THICKNESS TOLERANCE IS + OR - 0.0003 | | STYLE DESIGNATOR | CIRCULAR |
|
|