|
|
|
National Stock Number:
5365-01-484-7369
Federal Supply Class:
5365
National Item Identification Number:
014847369
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 11460573 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 11460573-002 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| FSC APPLICATION DATA | NHA PN 11456680 | | OVERALL LENGTH | 3.050 INCHES NOMINAL | | OVERALL WIDTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPACER, PLATE | | SPECIAL FEATURES | FOUR MOUNTING HOLES 0.117 MIN 0.123 MAX INCH 1 PLACED IN EACH OF FOUR CORNERS; DISTANCE BETWEEN HOLE CENTER AND EDGE 0.090 INCH, DISTANCE BETWEEN HOLE CENTER AND HOLE CENTER 2.870 INCH ON LENGTH, DISTANCE BETWEEN HOLE CENTER AND EDGE 0.090 INCH, DISTANCE BETWEEN HOLE CENTER AND HOLE CENTER 0.570 ONWIDTH | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CLASS 1A OR CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|