5365-01-484-6720 SPACER,SLEEVE Index 5365-01-484-6722 SPACER,SLEEVE

National Stock Number:
5365-01-484-6721

Federal Supply Class:
5365

National Item Identification Number:
014846721

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
431051477445RTX CORPORATION


Techincal Specification:
APERTURE DIAMETER0.3740 INCHES MINIMUM AND 0.3840 INCHES MAXIMUM
HOLE DIAMETER0.1330 INCHES MINIMUM AND 0.1390 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5599 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALNICKEL ALLOY 625
PART NAME ASSIGNED BY CONTROLLING AGENCYSPACER
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.1410 INCHES NOMINAL
OVERALL LENGTH1.2820 INCHES NOMINAL
OVERALL THICKNESS0.0220 INCHES MINIMUM AND 0.0280 INCHES MAXIMUM
OVERALL WIDTH0.5000 INCHES NOMINAL
STYLE DESIGNATORNON-CIRCULAR W/SQUARE CORNERS


Click here to Register for Free 30-day Trial