|
|
|
National Stock Number:
5365-01-349-9725
Federal Supply Class:
5365
National Item Identification Number:
013499725
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 11665114 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| APERTURE DIAMETER | 4.760 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 6.312 INCHES NOMINAL | | BOLT HOLE QUANTITY | 11 | | HOLE DIAMETER | 0.186 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | OUTSIDE DIAMETER | 7.260 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/7,H34 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11,T6 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 6061 | | SPECIAL FEATURES | OUTSIDE SURFACE CHAMFERED TO 45 DEGREES,0.180 INS DIA | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE OR TT-E-485 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ENAMEL SEMIGLOSS |
|
|