|
|
|
National Stock Number:
5365-01-271-9026
Federal Supply Class:
5365
National Item Identification Number:
012719026
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5365PL0690693 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | P189-8 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.445 INCHES MINIMUM AND 0.455 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.867 INCHES MINIMUM AND 0.883 INCHES MAXIMUM | | END RADIUS | 0.582 INCHES MINIMUM AND 0.612 INCHES MAXIMUM | | HOLE DIAMETER | 0.128 INCHES MINIMUM AND 0.138 INCHES MAXIMUM | | OVERALL LENGTH | 1.185 INCHES MINIMUM AND 1.205 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/4 T3 OR T81 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/11 T6 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 6061 | | STYLE DESIGNATOR | NON-CIRCULAR W/RADIUS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE I MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 CLASS 1A MIL SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE AND PLASTIC POLYAMIDE OR CHROMATE |
|
|