|
|
|
National Stock Number:
5365-01-271-5821
Federal Supply Class:
5365
National Item Identification Number:
012715821
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1D51111-501 | 0FC43 | MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS AEROSPACE DEFENSE AND ELECTRONICS SYSTEMS | | 1D51111-501 | 18355 | THE BOEING COMPANY | | 1D51111-501 | 32865 | DRS NETWORK & IMAGING SYSTEMS LLC |
|
Techincal Specification:
| LARGEST BOLT HOLE DIAMETER | 0.1380 INCHES NOMINAL | | LARGEST BOLT HOLE QUANTITY | 3 | | OUTSIDE DIAMETER | 2.9980 INCHES MINIMUM AND 2.9990 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP XM-12 | | SMALLEST BOLT HOLE DIAMETER | 0.3125 INCHES NOMINAL | | SMALLEST BOLT HOLE QUANTITY | 3 | | SPECIAL FEATURES | OFF-CENTERED APERTURE WITH A KEY; SMALLER HOLES ARE 0.138-32 UNJC-3B AND EQUALLY SPACED,LARGER HOLES ARE 0.312-24 UNJF-3B AND EQUALLY SPACED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM AND CHROMATE |
|
|