|
|
|
National Stock Number:
5365-01-266-9224
Federal Supply Class:
5365
National Item Identification Number:
012669224
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 135B6600 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| APERTURE WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | APERTURE LENGTH | 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.179 INCHES MAXIMUM | | INSIDE CORNER RADIUS | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH | 0.200 INCHES MINIMUM AND 0.540 INCHES MAXIMUM | | OVERALL LENGTH | 2.980 INCHES MINIMUM AND 3.020 INCHES MAXIMUM | | OVERALL WIDTH | 1.300 INCHES MINIMUM AND 1.340 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-L-19538 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | LACQUER |
|
|