|
|
|
National Stock Number:
5365-01-266-4951
Federal Supply Class:
5365
National Item Identification Number:
012664951
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 68A250580-2007 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.560 INCHES NOMINAL | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.570 INCHES MINIMUM AND 2.580 INCHES MAXIMUM | | HOLE DIAMETER | 0.577 INCHES MINIMUM AND 0.586 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.560 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.860 INCHES NOMINAL | | OVERALL LENGTH | 4.290 INCHES NOMINAL | | OVERALL WIDTH | 1.130 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP XM-13 | | SPECIAL FEATURES | 4 ADDITIONAL HOLES 0.1635 IN. MIN 0.1660 IN. MAX DIA,LOCATED ON THE SAME CENTERLINE AS THE BOLT HOLES; BOLT HOLES ARE CENTERED BETWEEN THE SMALLER HOLES | | STYLE DESIGNATOR | NON-CIRCULAR W/CORNER RADIUS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | PS13001 CAGEC 76301 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|