5365-01-266-2552 SHIM Index 5365-01-266-2554 SHIM

National Stock Number:
5365-01-266-2553

Federal Supply Class:
5365

National Item Identification Number:
012662553

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
76209-03005-10878286SIKORSKY AIRCRAFT CORPORATION
AL76209-03005-10878286SIKORSKY AIRCRAFT CORPORATION
PL76209-03005-10878286SIKORSKY AIRCRAFT CORPORATION


Techincal Specification:
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.280 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.860 INCHES NOMINAL
CONSTRUCTIONLAMINATED
FEATURES PROVIDEDSEPARABLE
HOLE DIAMETER0.375 INCHES NOMINAL
LAMINATION QUANTITY62
LAMINATION THICKNESS0.002 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.370 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.370 INCHES NOMINAL
OVERALL LENGTH2.000 INCHES NOMINAL
OVERALL WIDTH1.610 INCHES NOMINAL
MATERIALALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY
SPECIAL FEATURESOFF CENTERED APERATURE 0.500 IN. DIA


Click here to Register for Free 30-day Trial