5365-01-265-7109 SHIM Index 5365-01-265-7111 SPACER,PLATE

National Stock Number:
5365-01-265-7110

Federal Supply Class:
5365

National Item Identification Number:
012657110

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
2381897-50388277THE BOEING COMPANY


Techincal Specification:
APERTURE DIAMETER2.878 INCHES MINIMUM AND 2.888 INCHES MAXIMUM
BOLT HOLE QUANTITY4
CONSTRUCTIONONE-PIECE
HOLE DIAMETER0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
INVERTED RADIUS0.500 INCHES NOMINAL
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL
OVERALL LENGTH4.687 INCHES NOMINAL
OVERALL WIDTH3.750 INCHES NOMINAL
MATERIALSTEEL COMP 1010
SIDE RADIUS FROM GASKET CENTER1.719 INCHES NOMINAL
SURFACE TREATMENTCADMIUM


Click here to Register for Free 30-day Trial