|
|
|
National Stock Number:
5365-01-263-3872
Federal Supply Class:
5365
National Item Identification Number:
012633872
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 917AS8158 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| APERTURE DIAMETER | 2.325 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 3.375 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.221 INCHES NOMINAL | | INVERTED RADIUS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM | | OVERALL WIDTH | 3.900 INCHES MINIMUM AND 4.020 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 OR STEEL UNS J92600 OR STEEL UNS J92900 | | SIDE RADIUS FROM GASKET CENTER | 1.590 INCHES MINIMUM AND 1.610 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 1,2,3 OR 6 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|