|
|
|
National Stock Number:
5365-01-221-9776
Federal Supply Class:
5365
National Item Identification Number:
012219776
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 1276-06-611 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 1276-06-611 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 1276-06-611 | A0199 | FINMECCANICA SPA | | 5365PL0821153 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5520285 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 3 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 74.0 MILLIMETERS NOMINAL | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 10.450 MILLIMETERS MINIMUM AND 10.703 MILLIMETERS MAXIMUM | | MATERIAL | ALUMINUM ALLOY 5083 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH | 5.0 MILLIMETERS NOMINAL | | OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH | 5.0 MILLIMETERS NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 12.0 MILLIMETERS NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 12.5 MILLIMETERS NOMINAL | | OVERALL LENGTH | 130.0 MILLIMETERS NOMINAL | | OVERALL WIDTH | 98.0 MILLIMETERS NOMINAL | | SPECIAL FEATURES | TEMPER H32 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|