|
|
|
National Stock Number:
5365-01-220-9740
Federal Supply Class:
5365
National Item Identification Number:
012209740
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 120335 | 00153 | BEI SENSORS & SYSTEMS CO. INC DBA EDCLIFF INSTRUMENTS DIVISION | | 120335 | 11534 | BEI SENSORS & SYSTEMS COMPANY, INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 0.800 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 0.956 INCHES NOMINAL | | BOLT HOLE QUANTITY | 8 | | LARGEST BOLT HOLE DIAMETER | 0.093 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 1.109 INCHES NOMINAL | | SMALLEST BOLT HOLE DIAMETER | 0.060 INCHES NOMINAL | | SPECIAL FEATURES | 2 HOLES THD 0.80UNC-2B; 3 HOLES CSK 100 DEG BY 0.172 PLUS 0.005 IN. DIA; CUTOUT ON OUTSIDE OF SPACER 0.30 IN. LONG 0.062 IN. DEEP | | STYLE DESIGNATOR | CIRCULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072 E-300 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|