|
|
|
National Stock Number:
5365-01-219-9151
Federal Supply Class:
5365
National Item Identification Number:
012199151
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 785606-2 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 3.445 INCHES MINIMUM AND 3.455 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 4.320 INCHES NOMINAL | | BOLT HOLE QUANTITY | 8 | | CONSTRUCTION | ONE-PIECE | | HARDNESS RATING | 79.5 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 82.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM | | HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.191 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5519 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 4.740 INCHES NOMINAL | | SPECIAL FEATURES | TWO ADDITIONAL BOLT HOLES 0.125 IN. OD,ON A 4.046 IN. DIA. BOLT CIRCLE |
|
|