|
|
|
National Stock Number:
5365-01-218-8311
Federal Supply Class:
5365
National Item Identification Number:
012188311
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5000348-3 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 1.276 INCHES MINIMUM AND 1.406 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.938 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | END RADIUS | 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM | | HOLE DIAMETER | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 6061 OR STEEL COMP 301 | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 2.502 INCHES MINIMUM AND 2.622 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/RADIUS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 1A MIL SPEC 1ST TREATMENT RESPONSE OR QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE OR PASSIVATE |
|
|