|
|
|
National Stock Number:
5365-01-218-4934
Federal Supply Class:
5365
National Item Identification Number:
012184934
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 1655721 | 05869 | RAYTHEON COMPANY |
|
Techincal Specification:
| APERTURE LENGTH | 2.835 INCHES MINIMUM AND 2.845 INCHES MAXIMUM | | APERTURE WIDTH | 1.335 INCHES MINIMUM AND 1.345 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 8 | | HOLE DIAMETER | 0.168 INCHES MINIMUM AND 0.174 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 T651 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.448 INCHES MINIMUM AND 0.452 INCHES MAXIMUM | | OVERALL LENGTH | 3.785 INCHES MINIMUM AND 3.815 INCHES MAXIMUM | | OVERALL WIDTH | 2.235 INCHES MINIMUM AND 2.265 INCHES MAXIMUM | | SPECIAL FEATURES | 2 C-BORE HOLES LOCATED IN TOP RIGHT AND BOTTOM LEFT CORNERS 0.117 MINUS 0.001 IN. AND PLUS 0.004 IN. DIA 0.225 IN. DIA 0.125 IN. DEPTH | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|