|
|
|
National Stock Number:
5365-01-216-5230
Federal Supply Class:
5365
National Item Identification Number:
012165230
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5003224-1 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | TT-C-490,TYPE 1 FED SPEC 1ST TREATMENT RESPONSE OR PN14.10,FSCM 99167 MFR REF 2ND TREATMENT RESPONSE | | SURFACE TREATMENT | PHOSPHATE ZINC OR PASSIVATE | | APERTURE DIAMETER | 3.266 INCHES MINIMUM AND 3.296 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 3.735 INCHES MINIMUM AND 3.765 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5519 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OR AMS 5062 ASSN STD 4TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | OVERALL WIDTH | 4.175 INCHES MINIMUM AND 4.325 INCHES MAXIMUM | | SIDE RADIUS FROM GASKET CENTER | 1.875 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE |
|
|