|
|
|
National Stock Number:
5365-01-216-1390
Federal Supply Class:
5365
National Item Identification Number:
012161390
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5000601-1 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 3.360 INCHES MINIMUM AND 3.390 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 6 | | CONSTRUCTION | ONE-PIECE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,1/4 OR 1/2 OR 3/4 OR FULL HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-766,1/4 OR 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 | | PROPRIETARY CHARACTERISTICS | PACS | | SPECIAL FEATURES | 0.281 IN. NOM DIA FOR 4 HOLES,0.265 IN. NOM DIA FOR 2 HOLES; 5 ROUNDED TABS AND 1 FLAT TOP TAB ON THE OD PERIPHERY |
|
|