|
|
National Stock Number: 5365-01-211-0725
Federal Supply Class: 5365
National Item Identification Number: 012110725
Description: SHIM
Detail: A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
3601516-1 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
APERTURE DIAMETER | 0.780 INCHES MINIMUM AND 0.800 INCHES MAXIMUM | BOLT HOLE QUANTITY | 4 | CONSTRUCTION | ONE-PIECE | END RADIUS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | LARGEST BOLT HOLE DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | OVERALL LENGTH | 1.750 INCHES MINIMUM AND 1.770 INCHES MAXIMUM | OVERALL WIDTH | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OR AMS 5510 ASSN STD 5TH MATERIAL RESPONSE OR AMS 5512 ASSN STD 6TH MATERIAL RESPONSE | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 | SMALLEST BOLT HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.178 INCHES MAXIMUM |
|
|