5340-01-210-7314 COUPLING,CLAMP,GROOVED Index 5340-01-210-7316 BRACKET,DOUBLEANGLE

National Stock Number:
5365-01-210-7315

Federal Supply Class:
5365

National Item Identification Number:
012107315

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
S8157N320-01070210HONEYWELL INTERNATIONAL INC.
S8157N320-01099193HONEYWELL INTERNATIONAL INC.


Techincal Specification:
APERTURE DIAMETER0.790 INCHES MINIMUM AND 0.792 INCHES MAXIMUM
CONSTRUCTIONONE-PIECE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 3RD MATERIAL RESPONSE OR ASTM A582 ASSN STD 4TH MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 5TH MATERIAL RESPONSE
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 303
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE DIAMETER0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA70210-S8157 MANUFACTURERS STANDARD
STYLE DESIGNATORCIRCULAR


Click here to Register for Free 30-day Trial