5365-01-210-3196 SPACER,PLATE Index 5365-01-210-3198 SPACER,PLATE

National Stock Number:
5365-01-210-3197

Federal Supply Class:
5365

National Item Identification Number:
012103197

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
1210B112303538LOCKHEED MARTIN CORPORATION
1210B112354497MARTIN MARIETTA TECHNOLOGIES INC SUB OF MARTIN MARIETTA CORP AERO AND NAVAL SYSTEMS
1213D1150 FIND 2503538LOCKHEED MARTIN CORPORATION
1213D1150 FIND 2554497MARTIN MARIETTA TECHNOLOGIES INC SUB OF MARTIN MARIETTA CORP AERO AND NAVAL SYSTEMS


Techincal Specification:
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.230 INCHES NOMINAL
BOLT HOLE QUANTITY5
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.675 INCHES NOMINAL
HOLE DIAMETER0.264 INCHES MINIMUM AND 0.272 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.450 INCHES NOMINAL
OVERALL LENGTH19.600 INCHES NOMINAL
OVERALL WIDTH0.750 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-765 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 304
STYLE DESIGNATORNON-CIRCULAR W/SQUARE CORNERS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENTPASSIVATE


Click here to Register for Free 30-day Trial