5365-01-210-1699 SHIM Index 5365-01-210-1701 SHIM

National Stock Number:
5365-01-210-1700

Federal Supply Class:
5365

National Item Identification Number:
012101700

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
753418-355345ALAMO AIRCRAFT, LTD.
753418-373030HAMILTON SUNDSTRAND CORPORATION
753418-38A623OGS INDUSTRIES, INC


Techincal Specification:
APERTURE DIAMETER5.000 INCHES NOMINAL
BOLT CIRCLE DIAMETER5.500 INCHES NOMINAL
BOLT HOLE QUANTITY7
CONSTRUCTIONONE-PIECE
GASKET CENTER TO FLAT DISTANCE2.910 INCHES NOMINAL
GASKET CENTER TO SECOND FLAT DISTANCE2.910 INCHES NOMINAL
HOLE DIAMETER0.186 INCHES MINIMUM AND 0.201 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5513 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 304
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE DIAMETER6.000 INCHES NOMINAL
SPECIAL FEATURESVICKERS HRDNESS 285.0 MAX


Click here to Register for Free 30-day Trial