5365-01-210-1627 SPACER,RING Index 5365-01-210-1629 SPACER,PLATE

National Stock Number:
5365-01-210-1628

Federal Supply Class:
5365

National Item Identification Number:
012101628

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
1233817119207U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
5365PL06484209009HINSPEKTORAT WSPARCIA SIL ZBROJNYCH
558403534623AM GENERAL LLC


Techincal Specification:
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.420 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.390 INCHES NOMINAL
HOLE DIAMETER0.530 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH1.220 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.610 INCHES MINIMUM AND 0.680 INCHES MAXIMUM
OVERALL LENGTH5.620 INCHES NOMINAL
OVERALL WIDTH2.700 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A569 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 1009
STYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 ASSN STD 1ST TREATMENT RESPONSE OR QQ-P-416 TY 2 CL 2 FED SPEC 2ND TREATMENT RESPONSE
SURFACE TREATMENTZINC OR CADMIUM AND CHROMATE


Click here to Register for Free 30-day Trial