|
|
|
National Stock Number:
5365-01-209-8610
Federal Supply Class:
5365
National Item Identification Number:
012098610
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 9376389 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 7 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.312 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 4.542 INCHES NOMINAL | | HOLE DIAMETER | 0.281 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.375 INCHES NOMINAL | | OVERALL LENGTH | 30.010 INCHES NOMINAL | | OVERALL WIDTH | 0.760 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-46059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 3RD MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 | | SPECIAL FEATURES | ALL HOLES CSK 80 DEGREES TO A DIAOF 0.490 INCH | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CADMIUM |
|
|