|
|
|
National Stock Number:
5365-01-208-6502
Federal Supply Class:
5365
National Item Identification Number:
012086502
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 1D49876-501 | 18355 | THE BOEING COMPANY | | 1D49876-503 | 0FC43 | MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS AEROSPACE DEFENSE AND ELECTRONICS SYSTEMS | | 1D49876-503 | 18355 | THE BOEING COMPANY | | 1D49876-503 | 32865 | DRS NETWORK & IMAGING SYSTEMS LLC |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | PROPRIETARY CHARACTERISTICS | PACS | | TEST DATA DOCUMENT | 18355-1D49876-501 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|