|
|
|
National Stock Number:
5365-01-207-7652
Federal Supply Class:
5365
National Item Identification Number:
012077652
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 751551-1-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 0.885 INCHES MINIMUM AND 0.895 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.340 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | END RADIUS | 0.625 INCHES NOMINAL | | HOLE DIAMETER | 0.189 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | LAMINATION QUANTITY | 9 AND 1 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL AND 0.017 INCHES NOMINAL | | OVERALL LENGTH | 1.740 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8,H19 OR H39 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/1,H19 FED SPEC 2ND MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 OR ALUMINUM ALLOY 1100 | | STYLE DESIGNATOR | NON-CIRCULAR W/RADIUS |
|
|