|
|
|
National Stock Number:
5365-01-207-2276
Federal Supply Class:
5365
National Item Identification Number:
012072276
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 8353-45-010 | 00268 | CEF INDUSTRIES, LLC | | 8353-45.010 | 00268 | CEF INDUSTRIES, LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 2.755 INCHES MINIMUM AND 2.765 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.555 INCHES MINIMUM AND 1.565 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.345 INCHES MINIMUM AND 0.355 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.437 INCHES NOMINAL | | OVERALL LENGTH | 3.615 INCHES MINIMUM AND 3.625 INCHES MAXIMUM | | OVERALL WIDTH | 3.235 INCHES MINIMUM AND 3.245 INCHES MAXIMUM | | MATERIAL | STEEL | | SPECIAL FEATURES | SIX SIDES; EVERY CORNER IS CURVED; APERTURE HAS A KEYWAY ON EACH END ALONG THE LENGTH,0.255 IN. RADIUS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|