|
|
|
National Stock Number:
5365-01-206-8434
Federal Supply Class:
5365
National Item Identification Number:
012068434
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3601460-4 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 2.330 INCHES MINIMUM AND 2.350 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.230 INCHES MINIMUM AND 0.240 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | OVERALL WIDTH | 3.290 INCHES MINIMUM AND 3.310 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES OR AMS 5510 ASSN STD 5TH MATERIAL RESPONSE OR AMS 5512 ASSN STD 6TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 | | SIDE RADIUS FROM GASKET CENTER | 1.270 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
|
|