|
|
|
National Stock Number:
5365-01-206-0496
Federal Supply Class:
5365
National Item Identification Number:
012060496
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 8353-45-020 | 00268 | CEF INDUSTRIES, LLC | | 8353-45-020 | 0ZTJ5 | AERO PRECISION INDUSTRIES LLC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.995 INCHES MINIMUM AND 3.005 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | AGAV | | HOLE DIAMETER | 0.345 INCHES MINIMUM AND 0.355 INCHES MAXIMUM | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, BALL NUT MOUNTING FLANGE | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.437 INCHES NOMINAL | | OVERALL LENGTH | 3.615 INCHES MINIMUM AND 3.625 INCHES MAXIMUM | | OVERALL THICKNESS | 0.020 INCHES NOMINAL | | OVERALL WIDTH | 3.235 INCHES MINIMUM AND 3.245 INCHES MAXIMUM | | SPECIAL FEATURES | SIX SIDES; EVERY CORNER IS CURVED; APERTURE HAS A KEYWAY ON EACH END ALONG THE LENGTH,0.255 IN. RADIUS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE | | APERTURE DIAMETER | 2.755 INCHES MINIMUM AND 2.765 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.555 INCHES MINIMUM AND 1.565 INCHES MAXIMUM |
|
|