5365-01-205-3532, SPACER,PLATE

5330-01-205-3533 SEAL,NONMETALLIC SPECIAL SHAPED

National Stock Number:
5365-01-205-3532

Federal Supply Class:
5365

National Item Identification Number:
012053532

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

3620428-1

99193

HONEYWELL INTERNATIONAL INC.

Techincal Specification:

BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE	0.310 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
BOLT HOLE QUANTITY	2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.500 INCHES NOMINAL
HOLE DIAMETER	0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH	0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
OVERALL LENGTH	1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM
OVERALL WIDTH	0.620 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AISI ASSN STD ALL MATERIAL RESPONSES
MATERIAL	STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 4340
STYLE DESIGNATOR	NON-CIRCULAR W/BEVELED CORNERS

Click here to Register for Free 30-day Trial