|
|
|
National Stock Number:
5365-01-205-3511
Federal Supply Class:
5365
National Item Identification Number:
012053511
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5007547-4 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 4.109 INCHES MINIMUM AND 4.139 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 4.860 INCHES MINIMUM AND 4.890 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CONSTRUCTION | LAMINATED | | HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | LAMINATION QUANTITY | 15 | | LAMINATION THICKNESS | 0.002 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1,H19 FED SPEC 1ST MATERIAL RESPONSE OR MIL-A-81596 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-A-81596 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-A-250/3 FED SPEC 3RD MATERIAL RESPONSE OR MIL-A-81596 MIL SPEC 4TH MATERIAL RESPONSE OR QQ-A-250/8,H39 FED SPEC 4TH MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 3003 OR ALUMINUM ALLOY 5052 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | OVERALL WIDTH | 5.614 INCHES MINIMUM AND 5.634 INCHES MAXIMUM | | SIDE RADIUS FROM GASKET CENTER | 2.423 INCHES MINIMUM AND 2.453 INCHES MAXIMUM | | SPECIAL FEATURES | 1 ADDITIONAL HOLE 0.093 IN. DIA NOT ON THE SAME BOLT CIRCLE | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE |
|
|