|
|
|
National Stock Number:
5365-01-199-4425
Federal Supply Class:
5365
National Item Identification Number:
011994425
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 0-080-000-52 PIECE 024 | 99193 | HONEYWELL INTERNATIONAL INC. | | 0-080-078-01 | 99193 | HONEYWELL INTERNATIONAL INC. | | V-0-080-078-01 | 1N8S8 | VERICOR POWER SYSTEMS LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.327 INCHES MINIMUM AND 0.333 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | HARDNESS RATING | 84.0 ROCKWELL B MINIMUM AND 96.0 ROCKWELL B MAXIMUM | | LARGEST BOLT HOLE DIAMETER | 0.263 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.120 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5045 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1020 | | SMALLEST BOLT HOLE DIAMETER | 0.102 INCHES MINIMUM AND 0.109 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2485 ASSN STD SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | OXIDE |
|
|