|
|
|
National Stock Number:
5365-01-168-0943
Federal Supply Class:
5365
National Item Identification Number:
011680943
Description:
SPACER,RING
Detail:
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
|
Manufacturer Information:
| M19622/12-0013 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-S-19622/12-0013 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| INSIDE DIAMETER | 0.711 INCHES MINIMUM AND 0.719 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.892 INCHES MINIMUM AND 0.900 INCHES MAXIMUM | | OVERALL THICKNESS | 0.062 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM 4066-82 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
|
|