5340-01-167-6429 BUMPER Index 5365-01-167-6432 SHIM

National Stock Number:
5365-01-167-6431

Federal Supply Class:
5365

National Item Identification Number:
011676431

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
100168-4479318MEGGITT NORTH HOLLYWOOD INC


Techincal Specification:
APERTURE DIAMETER0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
CONSTRUCTIONONE-PIECE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC ALL MATERIAL RESPONSES OR MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304
PROPRIETARY CHARACTERISTICSPACS
OUTSIDE DIAMETER0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
STYLE DESIGNATORCIRCULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENTPASSIVATE


Click here to Register for Free 30-day Trial