8040-01-165-0086 PRIMER,ADHESIVE Index 5905-01-165-0088 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5365-01-165-0087

Federal Supply Class:
5365

National Item Identification Number:
011650087

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
605B224H0148306NORTHROP GRUMMAN SUPPORT SERVICES CORP
605B224H0197942NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
BOLT HOLE QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.280 INCHES NOMINAL
HOLE DIAMETER0.248 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH0.800 INCHES NOMINAL
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.800 INCHES NOMINAL
OVERALL LENGTH3.000 INCHES NOMINAL
OVERALL WIDTH1.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8,TEMP H32 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY
SPECIAL FEATURESONLY ONE SIDE CONTAINS BEVEL
STYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES


Click here to Register for Free 30-day Trial