|
|
|
National Stock Number:
5365-01-162-5900
Federal Supply Class:
5365
National Item Identification Number:
011625900
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5571227 | 34623 | AM GENERAL LLC |
|
Techincal Specification:
| APERTURE DIAMETER | 3.6245 INCHES MINIMUM AND 3.6260 INCHES MAXIMUM | | BOLT CIRCLE DIAMETER | 5.750 INCHES NOMINAL | | BOLT HOLE QUANTITY | 3 | | HOLE DIAMETER | 0.690 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-590 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY A360.0 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE CORNER RADIUS | 0.690 INCHES NOMINAL | | OUTSIDE CORNER INVERTED RADIUS | 0.620 INCHES NOMINAL | | OVERALL WIDTH | 6.440 INCHES NOMINAL | | SIDE RADIUS FROM GASKET CENTER | 2.250 INCHES NOMINAL | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE |
|
|