|
|
|
National Stock Number:
5365-01-161-1490
Federal Supply Class:
5365
National Item Identification Number:
011611490
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 68A112172-2013 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM | | HOLE DIAMETER | 0.406 INCHES MINIMUM AND 0.413 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,T81 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.370 INCHES MINIMUM AND 0.430 INCHES MAXIMUM | | OVERALL LENGTH | 4.300 INCHES MINIMUM AND 4.900 INCHES MAXIMUM | | OVERALL WIDTH | 0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM | | SPECIAL FEATURES | ONE END CHAMFERED 0.040 IN. MIN. AND 0.070 IN. MAX BY 0.040 IN. MIN AND0.070 IN. MAX WITH A .62 RADIUS | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|