5365-01-160-7782 SPACER,RING Index 3441-01-160-7784 EXPANDER,TUBE

National Stock Number:
5365-01-160-7783

Federal Supply Class:
5365

National Item Identification Number:
011607783

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.


Manufacturer Information:
4M49-5PM1376301THE BOEING COMPANY


Techincal Specification:
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.297 INCHES NOMINAL
BOLT HOLE QUANTITY44
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
HOLE DIAMETER0.417 INCHES MINIMUM AND 0.427 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.813 INCHES NOMINAL
OVERALL LENGTH71.500 INCHES NOMINAL
OVERALL WIDTH0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-15035,TY FBI MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALPLASTIC PHENOLIC
STYLE DESIGNATORNON-CIRCULAR W/SQUARE CORNERS


Click here to Register for Free 30-day Trial