|
|
|
National Stock Number:
5365-01-159-5974
Federal Supply Class:
5365
National Item Identification Number:
011595974
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 182135-4 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | OVERALL LENGTH | 0.660 INCHES NOMINAL | | OVERALL WIDTH | 0.220 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | MATERIAL | STEEL COMP 304 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X | | SPECIAL FEATURES | 0.125 IN. DIA,0.250 IN. FROM CENTER LINE TO OUTSIDE EDGE 1 HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CPS 6515,FSCM 71791 MFR REF SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | PASSIVATE |
|
|