|
|
|
National Stock Number:
5365-01-158-2706
Federal Supply Class:
5365
National Item Identification Number:
011582706
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 160D412054-23 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 160D412054-23 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.920 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.140 INCHES NOMINAL | | CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 21 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 0.342 INCHES MINIMUM AND 0.349 INCHES MAXIMUM | | LARGEST BOLT HOLE QUANTITY | 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4013 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2014 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 1.400 INCHES NOMINAL | | OVERALL LENGTH | 3.720 INCHES NOMINAL | | OVERALL WIDTH | 1.120 INCHES NOMINAL | | SMALLEST BOLT HOLE DIAMETER | 0.280 INCHES MINIMUM AND 0.287 INCHES MAXIMUM | | SMALLEST BOLT HOLE QUANTITY | 1 | | SPECIAL FEATURES | SHIM RECTANGULAR,TAPERED AND OFFSET; OPPOSITE END WIDTH 1.240 IN.; 1STHOLE 0.342-0.349 IN. DIA,2ND HOLE 0.280-0.287 IN. DIA |
|
|