|
|
|
National Stock Number:
5365-01-077-8229
Federal Supply Class:
5365
National Item Identification Number:
010778229
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 325421CLF | 00088 | ROYAL OAK GAGE INC | | 325421CLF | 77445 | RTX CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 1.025 INCHES MINIMUM AND 1.045 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.062 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.062 INCHES NOMINAL | | HOLE DIAMETER | 0.281 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.250 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 1.528 INCHES MINIMUM AND 1.592 INCHES MAXIMUM | | OVERALL WIDTH | 1.528 INCHES MINIMUM AND 1.592 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4001 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 | | SPECIAL FEATURES | ONE 0.187 IN. DIA HOLE AND TWO 0.093 IN. DIA HOLES ALONG LG |
|
|