|
|
|
National Stock Number:
5365-01-077-8224
Federal Supply Class:
5365
National Item Identification Number:
010778224
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 325421CLB | 00088 | ROYAL OAK GAGE INC | | 325421CLB | 77445 | RTX CORPORATION |
|
Techincal Specification:
| APERTURE DIAMETER | 1.025 INCHES MINIMUM AND 1.045 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.062 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.062 INCHES NOMINAL | | CONSTRUCTION | ONE-PIECE | | HOLE DIAMETER | 0.281 INCHES NOMINAL | | OUTSIDE CORNER RADIUS | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.250 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 1.528 INCHES MINIMUM AND 1.592 INCHES MAXIMUM | | OVERALL WIDTH | 1.528 INCHES MINIMUM AND 1.592 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4001 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 | | SPECIAL FEATURES | ONE 0.187 IN. DIA HOLE AND TWO 0.093 IN. DIA HOLES ALONG LG | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|