|
|
|
National Stock Number:
5365-01-075-4963
Federal Supply Class:
5365
National Item Identification Number:
010754963
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 12267457-2 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | DAX12735 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| APERTURE DIAMETER | 3.960 INCHES NOMINAL | | BOLT CIRCLE DIAMETER | 4.720 INCHES NOMINAL | | BOLT HOLE QUANTITY | 4 | | CONSTRUCTION | ONE-PIECE | | FEATURES PROVIDED | NONSEPARABLE | | HOLE DIAMETER | 0.404 INCHES MINIMUM AND 0.416 INCHES MAXIMUM | | OUTSIDE CORNER RADIUS | 0.380 INCHES NOMINAL | | OVERALL WIDTH | 0.040 INCHES NOMINAL | | MATERIAL | STEEL | | SIDE RADIUS FROM GASKET CENTER | 2.440 INCHES NOMINAL | | SPECIAL FEATURES | MUST BE CLEAN AND FREE OF BURRS. P/N ACID INK ETCHED | | STYLE DESIGNATOR | NON-CIRCULAR W/APERTURE | | TEST DATA DOCUMENT | 19207-12267457-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|