|
|
|
National Stock Number:
5365-01-074-9392
Federal Supply Class:
5365
National Item Identification Number:
010749392
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 39-27664-501 | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | FSC APPLICATION DATA | P/O FILTER,COMPRESSIBLE MICROWAVE,AN/ALT-32H AND AN/ALQ-122,AFSATCOM; U/O B52 | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | OVERALL LENGTH | 10.990 INCHES MINIMUM AND 11.010 INCHES MAXIMUM | | OVERALL WIDTH | 5.490 INCHES MINIMUM AND 5.510 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533,COND A,ASTMB 194 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | COPPER ALLOY 172 | | SPECIAL FEATURES | ONLY ONE CORNER IS BEVELED; ITEM IS A SERIES OF BENDS ALONG THE LENGTH. EACH BEND-UNIT IS 1.000 IN. LONG AND IS BENT IN THE MIDDLE TO A DEPTH OF 0.140 IN. |
|
|