|
|
|
National Stock Number:
5365-01-073-5441
Federal Supply Class:
5365
National Item Identification Number:
010735441
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 708389-1 | 96214 | RAYTHEON COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.090 INCHES MINIMUM AND 1.110 INCHES MAXIMUM | | CONSTRUCTION | LAMINATED | | FSC APPLICATION DATA | AN/AAQ-10 | | HOLE DIAMETER | 0.079 INCHES MINIMUM AND 0.099 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.130 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | OVERALL LENGTH | 1.340 INCHES MINIMUM AND 1.380 INCHES MAXIMUM | | OVERALL WIDTH | 0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL CORROSION RESISTING | | SPECIAL FEATURES | BETWEEN THE BOLT HOLES IS A CUT-OUT PORTION WHICH BEGINS 0.170 IN. FROM EACH END AND AT AN ANGLE OF 45.0 NARROWS TO A WIDTH OF 0.130 IN. FOR A DISTANCE OF 0.640 IN.; INSIDE CORNERS ARE ROUNDED,0.090 IN. RADIUS |
|
|