|
|
|
National Stock Number:
5365-01-067-9661
Federal Supply Class:
5365
National Item Identification Number:
010679661
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 5365PL0639793 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | L22077P02 | 03350 | GENERAL ELECTRIC COMPANY DBA GE STRUCTURED SERVICES DIV GENERAL ELECTRIC STRUCTURED SERVICES LP | | L22077P02 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 4 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 5.000 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 6.500 INCHES NOMINAL | | HOLE DIAMETER | 0.810 INCHES MINIMUM AND 0.880 INCHES MAXIMUM | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.000 INCHES NOMINAL | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 1.250 INCHES NOMINAL | | OVERALL LENGTH | 8.970 INCHES MINIMUM AND 9.030 INCHES MAXIMUM | | OVERALL WIDTH | 6.970 INCHES MINIMUM AND 7.030 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | TWO HOLES 0.468 IN. MIN TO 0.475 IN. MAX DIA,LOCATED 2.350 IN. FROM CENTER ALONG THE WIDTH AT ONE SIDE AND ONE HOLE LOCATED 3.500 IN. FROM CENTER OF HOLE TO BOTTOM EDGE AND 0.650 IN. FROM CENTER OF HOLE TO ONE SIDE | | STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
|
|