5365-01-066-9043, SPACER,PLATE

National Stock Number:
5365-01-066-9043

Federal Supply Class:
5365

National Item Identification Number:
010669043

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

162351-01

35351

GE AVIATION SYSTEMS LLC

Techincal Specification:

APERTURE LENGTH	3.750 INCHES NOMINAL
APERTURE WIDTH	2.120 INCHES MINIMUM AND 2.180 INCHES MAXIMUM
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	2.750 INCHES MINIMUM AND 2.770 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	3.740 INCHES MINIMUM AND 3.760 INCHES MAXIMUM
HOLE DIAMETER	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
INSIDE CORNER RADIUS	0.180 INCHES NOMINAL
OUTSIDE CORNER RADIUS	0.060 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
OVERALL LENGTH	3.740 INCHES MINIMUM AND 3.760 INCHES MAXIMUM
OVERALL WIDTH	3.320 INCHES MINIMUM AND 3.380 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024
SPECIAL FEATURES	U-SHAPED ITEM,WIDTH OF EACH ARM IS 0.600 IN.
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,TYPE 1A MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	CHROMATE

Click here to Register for Free 30-day Trial